Beam Power Backup Kit - DISCONTINUED (RST068)
Beam Communications undertakes warranty and out of warranty servicing across our extensive product range.
For further information on our servicing process, warranty items and conditions please click on the button below.
Frequently Asked Questions
Powering Up/Restarting
The power bank may stop charging for several reasons.
If the temperature is beyond the safe charging limits charging is disabled.
The power bank has a built in safety feature that manages the charging activity.
To maintain the normal operating performance of the power bank make sure that the ambient temperature is within its specified operating temperature - refer to the specs page.
Quick and momentary press of the ON/Off switch will display the battery charge level in percentage.
The Power bank has an X-Charge mode that allows charging of low power devices like wearables.
A quick double press of the On/Off Switch enables the X-Charge Mode. The display will show the symbol X. A quick double press of the On/Off Switch exits the X-Charge mode as well to resume charging other devices.
The RST066 has a over 500 full charge-discharge cycles.
The RST068 has a similar capacity as the RST060 Battery Back Up.
You may use the RST060 Standby and Talk Time Hours estimate for the RST068 Battery Life when used with Beam Docks and Terminals.
Shipping/Compliance
The Power bank can be safely carried on the plane as part of the carry on luggage as it is rated at 99.9Wh capacity.
The Power Bank is not water proof therefore all measures should be considered to keep it from being wet or exposed to high moisture environment.
Beam Power Backup Kit - DISCONTINUED Specifications
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H) | mm | inches |
SuperTank | 119 x 73 x 40 | 4.7 x 2.8 x 1.6 |
AC Charger | 58 x 58 x 28 | 2.28 x 2.28 x 1.1 |
DC Charger | 66 x 26 x 26 | 2.6 x 1.02 x 1.02 |
Beam Intelligent Power Cable | 1200 | 39.93 |
RST068 Box Kit | 180L x 165W x 120H | 7.08L x 6.49W x 4.72H |
Weight | kg | lbs |
SuperTank | 0.5 | 1.1 |
RST068 Box Kit | 1.2 | 2.64 |
POWER SPECIFICATION
SuperTank Battery | Input/Output: USB-C 1: 5-20V, up to 5A, 100W* (PD) Output: USB-C 2: 5-20V, up to 3A, 60W (PD) Output: USB 1: 5V/3A, 9V/2A, 12V/1.5A, 18W (ZEN+ 2.0 Quick Charge) Output: USB 2: 5V/3A, 15W (ZEN+ Quick Charge) |
AC Charger (60W) | Input: 100Vac to 240Vac 50/60Hz 1.3A US plug (comes with Intl. Adapters EU/GB/AU) Output: USB-C PD (5Vdc @3A, 9Vdc @3A, 15Vdc @3A, 20Vdc @3A) Typical charging time of SuperTank – under 2 hours |
DC Charger (36W) | Input 1: 12Vdc or 24Vdc (4A max) Output 1: USB-A 18W (4.5Vdc @3A, 5Vdc @4.5A, 9Vdc @3A, 12Vdc @2.5A) Output 2: USB-C PD 18W (5Vdc @3A, 9Vdc @3A, [email protected], 15Vdc @2A, 20Vdc @1.5A) Typical charging time of SuperTank – under 6 hours |
Beam Intelligent Power Cable | Input: USB-C PD 2.0 Output: Molex **15Vdc 3.25A |
*Reduces to 60W when Power Bank capacity is below 50% in Output mode. **Output drops to 12Vdc when 15Vdc input is not available |
ENVIRONMENTAL SPECIFICATIONS
Temperature | Degrees °C | Degrees °F |
SuperTank | ||
Storage | -20 to +65 | -4 to +149 |
Operating (Charging) | 0 to +40 | +32 to +104 |
Operating (Discharging) | 0 to +55 | +32 to +131 |
AC Charger | ||
Storage | -20 to +80 | -4 to +176 |
Operating | 0 to +40 | +32 to +104 |
DC Charger | ||
Storage | -40 to +70 | -40 to +158 |
Operating | -10 to +55 | +14 to +131 |
Beam Intelligent Power Cable | ||
Storage | -20 to +80 | -4 to +176 |
INTERFACE
SuperTank | |
Visual Interface | Digital LED |
Physical Interface | Power On/Off/X-Mode Button |
DC Charger | |
Visual Interface | Blue LED |
KIT CONTENTS
RST066 SuperTank (includes 100W USB-C Cable) |
AC Charger (US Plug with international adaptors for EU/GB/AU) |
DC Charger |
Beam Intelligent Power Cable (1.2 m / 3.93 ft) |
IsatPhone Charging Cable |
Quick Start Guide |
Manuals & Guides
Beam Power Backup Kit Quick Start Guide
Frequently Asked Questions
Powering Up/Restarting
The power bank may stop charging for several reasons.
If the temperature is beyond the safe charging limits charging is disabled.
The power bank has a built in safety feature that manages the charging activity.
To maintain the normal operating performance of the power bank make sure that the ambient temperature is within its specified operating temperature - refer to the specs page.
Quick and momentary press of the ON/Off switch will display the battery charge level in percentage.
The Power bank has an X-Charge mode that allows charging of low power devices like wearables.
A quick double press of the On/Off Switch enables the X-Charge Mode. The display will show the symbol X. A quick double press of the On/Off Switch exits the X-Charge mode as well to resume charging other devices.
The RST066 has a over 500 full charge-discharge cycles.
The RST068 has a similar capacity as the RST060 Battery Back Up.
You may use the RST060 Standby and Talk Time Hours estimate for the RST068 Battery Life when used with Beam Docks and Terminals.
Shipping/Compliance
The Power bank can be safely carried on the plane as part of the carry on luggage as it is rated at 99.9Wh capacity.
The Power Bank is not water proof therefore all measures should be considered to keep it from being wet or exposed to high moisture environment.
Beam Power Backup Kit - DISCONTINUED Specifications
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H) | mm | inches |
SuperTank | 119 x 73 x 40 | 4.7 x 2.8 x 1.6 |
AC Charger | 58 x 58 x 28 | 2.28 x 2.28 x 1.1 |
DC Charger | 66 x 26 x 26 | 2.6 x 1.02 x 1.02 |
Beam Intelligent Power Cable | 1200 | 39.93 |
RST068 Box Kit | 180L x 165W x 120H | 7.08L x 6.49W x 4.72H |
Weight | kg | lbs |
SuperTank | 0.5 | 1.1 |
RST068 Box Kit | 1.2 | 2.64 |
POWER SPECIFICATION
SuperTank Battery | Input/Output: USB-C 1: 5-20V, up to 5A, 100W* (PD) Output: USB-C 2: 5-20V, up to 3A, 60W (PD) Output: USB 1: 5V/3A, 9V/2A, 12V/1.5A, 18W (ZEN+ 2.0 Quick Charge) Output: USB 2: 5V/3A, 15W (ZEN+ Quick Charge) |
AC Charger (60W) | Input: 100Vac to 240Vac 50/60Hz 1.3A US plug (comes with Intl. Adapters EU/GB/AU) Output: USB-C PD (5Vdc @3A, 9Vdc @3A, 15Vdc @3A, 20Vdc @3A) Typical charging time of SuperTank – under 2 hours |
DC Charger (36W) | Input 1: 12Vdc or 24Vdc (4A max) Output 1: USB-A 18W (4.5Vdc @3A, 5Vdc @4.5A, 9Vdc @3A, 12Vdc @2.5A) Output 2: USB-C PD 18W (5Vdc @3A, 9Vdc @3A, [email protected], 15Vdc @2A, 20Vdc @1.5A) Typical charging time of SuperTank – under 6 hours |
Beam Intelligent Power Cable | Input: USB-C PD 2.0 Output: Molex **15Vdc 3.25A |
*Reduces to 60W when Power Bank capacity is below 50% in Output mode. **Output drops to 12Vdc when 15Vdc input is not available |
ENVIRONMENTAL SPECIFICATIONS
Temperature | Degrees °C | Degrees °F |
SuperTank | ||
Storage | -20 to +65 | -4 to +149 |
Operating (Charging) | 0 to +40 | +32 to +104 |
Operating (Discharging) | 0 to +55 | +32 to +131 |
AC Charger | ||
Storage | -20 to +80 | -4 to +176 |
Operating | 0 to +40 | +32 to +104 |
DC Charger | ||
Storage | -40 to +70 | -40 to +158 |
Operating | -10 to +55 | +14 to +131 |
Beam Intelligent Power Cable | ||
Storage | -20 to +80 | -4 to +176 |
INTERFACE
SuperTank | |
Visual Interface | Digital LED |
Physical Interface | Power On/Off/X-Mode Button |
DC Charger | |
Visual Interface | Blue LED |
KIT CONTENTS
RST066 SuperTank (includes 100W USB-C Cable) |
AC Charger (US Plug with international adaptors for EU/GB/AU) |
DC Charger |
Beam Intelligent Power Cable (1.2 m / 3.93 ft) |
IsatPhone Charging Cable |
Quick Start Guide |