• Inmarsat
  • Terminals
  • In-Building
  • Maritime

Oceana 400 (OC400)

Beam Oceana 400 is a cost-effective, high quality, slimline satellite terminal that allows connection to the Inmarsat GSPS, IsatPhone Link and FleetPhone satellite services.

  • Data
  • Voice
  • SMS
  • RJ11/POTS
  • PABX Integration
  • USB
  • SIM

Oceana 400 Features

Integrated Solution

The Oceana 400 terminal is supplied with the Beam Active Mast Mount Antenna (ISD710) providing a complete integrated solution that is ready for use anytime, anywhere.

On-board Vessel Communications

The terminal was purposely designed for maritime applications to meet an IP53 ingress rating making the terminal suitable for on-board vessel communications the terminal can easily be used in any land based fixed site application.

Key Benefits and Features

• High quality design, IP53 rating
• RJ11/POTS interface, cable runs up to 600m/2000ft
• Voice, SMS, SBD and Circuit Switched Data capable
• USB data interface
• Accessory / Ignition sense
• 10-32V DC power input
• AC Plug pack included 110/240 input
• Basic SMS support via Falcon application (via USB port)
• Active Marine Grade Fixed site Antenna included in Kit
• Supports optional Active Vehicular Magnetic or Bolt antennas
• Full certified, Inmarsat, RoHS, CE, IEC60945, AS/EN60950
• 1 year repair or replacement warranty

Watch the Oceana 400 Video

Oceana 400 is a complete slimline terminal that allows connection to the Inmarsat GSPS satellite network, where the simplest access to reliable voice and data communication services are required.

Featuring an intelligent RJ11/POTS interface, it enables connection of up to 5 standard corded/cordless phones or integration to a PABX system.

The Oceana 400 is designed to operate with the Inmarsat GSPS, IsatPhone Link & FleetPhone SIM’s to provide reliable voice, data & SMS communication services.

The Oceana 400 terminal provides access to reliable voice and data communications services, offering a cost-effective and high quality solution for land based as well as maritime users.

Oceana 400 Specifications

Inmarsat Transceiver

Inmarsat-4 Satellite
GMR-2+ Frequency Bands
Carrier Frequencies Channel 0 = 1626.525 MHz Channel 169 = 1660.475 MHz
Tx Operating Frequency 1626.5 - 1660.5 MHz
Rx Operating Frequency 1518 – 1565 MHz (Inmarsat) 1565.19 – 1585.65 MHz (GPS)
RF Output Impedance 50 Ohms
TX Modulation GMSK
RX Modulation OQPSK


Average Power Consumption
(Active antenna connected)
Current @ 15v DC Power
Standby 0.21A 3.1W
Transmit 0.57A 8.5W
Sleep Mode 4mA 60mW
Peak Current 1.73A 25.9W
Average Power Consumption
(Passive antenna connected)
Current @ 15v DC Power
Standby 0.17A 2.5W
Transmit 0.29A 4.4W
Sleep Mode 4mA 60mW
Peak Current 0.56A 8.4W

Connectors / Interfaces

POTS/RJ11 RJ11/2-wire, 5REN @ 600m, adjustable dial, ring, busy tone configured frequency and adaptive impedance.
Antenna TNC-Female
GPS Antenna SMA-Female
10-32vDC 4-way microFit (AC/DC adaptor, or DC lead)
Configuration/data USB Mini B
LEDs Signal, Call, Message


Temperature Degrees °C Degrees °F
Operating Range -20°C to +55°C -4°F to +131°F
Storage -30°C to +80°C -22°F to +176°F
Humidity < = 75% RH


Dimensions mm inches
Unit 240 x 190 x 53 8.0 x 7.5 x 2.1
Outer Box 420W x 180D x 300H 16.54W x 7.09D x 11.81H
Weight kg lbs
Unit 0.58 1.28
Box 3.2 7.05

Kit Contents Oceana 400

Oceana 400 terminal
ISD710 Maritime antenna (active)
110-240V AC plug pack 15v DC out
10-32V DC power cable & USB cable
2 x screws for wall mounting
User manual & Quick Start Guide
Antenna installation guide


Inmarsat Type Approval
CE Compliance
Electrical Safety
Industry Canada