Ex-Demo – 12 months full warranty. Limited quantity available until sold out
The 9522B is Iridium’s 2nd-generation satellite transceiver for truly global voice and data communications. It is ideal for sending and receiving voice and data from equipment everywhere on the planet.
It easily integrates into a wide variety of applications through a RS232 serial interface and AT command set, and a pass-thru connector allows a GPS receiver to use the same antenna as the Iridium 9522B LBT.
| Power Average - Voice / Data Call (see note) | 4W |
| Typical current during call (see note) | 800mA |
| Max current during call | 2.5A |
| Input Standby current (average) | 250mA |
| Main Input Voltage - Consumption at +5VDC | 40mV peak to peak |
| Main Input Voltage Range | +4.0V DC to +32V DC |
| Multiplexing Method | TDMA / FDMA |
| Input/Output Impedance | 50Ω |
| Oscillator Stability | ± 1.5 ppm |
| Duplexing Method | TDD (Time Domain Duplex) |
| Frequency Range | 1616 MHz to 1626.5 MHz |
| Receiver Spurious Rejection at offsets > 1 MHz (typical) | 60dB |
| Receiver Sensitivity at 50Ω (typical) | -118.5dBm |
| Average Power during a frame (typical) | 0.6W |
| Average power during a transmit slot (max) | 7W |
| Temperature | Degrees °C | Degrees °F |
| Operating Temperature Range | -30ºC to +60ºC | -22ºF to +140ºF |
| Storage Temperature Range | -40ºC to +85ºC | -40ºF to +185ºF |
| Operating Humidity Range | 25 to 75% RH | |
| Storage Humidity Range | ≤ 93% RH |
| Dimensions | mm | inches |
| Width | 81 x 28 x 162 | 3.19 x 1.10 x 6.38 |
| Weight | kg | lbs |
| Transceiver | 0.420 | 0.925 |